Cold Doping Step 1!

Here I am making the flat table where the stone will be glued to. What I do is heat up the dop then with the wax being warmed up to I put the wax on the dop and then take a big flat dop and put it in the fixture. then I heat the wax again and push the flat dop to the wax to make a flat table.

Cold Doping Step 1!

Close up!

Cold Doping Step 1!

The Dop after it is done with the wax.

Cold Doping Step 2!

The doping toll I use.

Cold Doping Step 3!

Putting the clay on.

Cold Doping Step 4!

Putting the stone in to the clay.

Cold Doping Step 5!

Here I'm setting the stone in the clay with a flat dop.

Cold Doping Step 5!

Here I'm setting the stone in the clay with a flat dop. close up

Cold Doping Step 6!

Here I'm checking alinement with the dop that will be glued to the stone.

Cold Doping Step 7!

Here i put the CA on the stone.

Cold Doping Step 7!

Here is a close up of the CA on the stone.

Cold Doping Step 8!

Here the stone is done and I check it out to make sure it is centered and that the dop did not move.